Painting and maintenance
For centuries, woodworkers have known that a protective layer must be applied to block the action of moisture and mold. The first paints date back to antiquity, before the Roman Empire, and were made from natural raw materials. One of the typical aspects of Wooden windows and doors It was the need for one Constant maintenance of this protection film.As the months passed, the paint became opaque, began to crack, and eventually peeled off in flakes. Some wood windows, such as larch, oak, iroko, or teak, are more resistant to weathering and in some cases can be used without treatment.
To avoid this phenomenon, the windows and the curtains were removed from the brackets, sanded and repainted. What was the reason for this aging? The cause lies in the polyurethane paints old-fashioned. Being a synthetic polymer like plastic, this finish dries over time and is damaged by the sun’s rays. It therefore becomes rigid and fragile and is no longer able to accommodate the natural expansion of wood, losing an important characteristic: elasticity. sturdier paints These are the lacquers, followed by dark walnut highlights and finally the light highlights.
The modern ones Water-based paints for window frames, On the other hand, they are more durable and eco-friendly, as they do not contain dangerous petroleum-derived solvents. The painting cycles applied by Aldena guarantee many years of durability with minimal maintenance. It is sufficient to clean dark surfaces periodically with water and neutral soap to remove dust and smog: after that, a revitalizing product is applied with a cloth to restore the lacquer’s elasticity and replenish its thickness. It should be noted that not all water-based paints are the same: here again, quality is a determining factor.
There is a type of wood that does not need any additional protection: this is the thermo-treated wood. The material is subjected to high temperatures in an oxygen-poor atmosphere until it loses its moisture and becomes more stable. It becomes lighter, darker and practically impervious to rain and pests because the heat renders the cellulose inert. At the same time, the wood’s hardness and fragility also increase, and the strength of glues and paints decreases.
In addition to its practical function, the paint also serves an aesthetic purpose. The surface film can add glossy reflections, make a surface opaque, make the wood lighter or darker, or completely change its color. In some cases, the underlying essence is worked on to enhance or conceal the grain before painting, depending on whether the unique characteristics of this material are to be retained or removed. This is the case, for example, with brushed larch wood that is subsequently lacquered.
